The original corefighter of the Gundam RX-78 Serie.
High detailed and fully colored model.
The FF-X7 Core Fighter was an integral part of Plan V of the Federation, forming a module of interchanging commando for the RX-78-2 Gundam, RX-77-2 Guncannon and RX-75-4 Guntank. Developed from the Hervic Company, that it developed also hunting FF-6 TIN Cod and FF-S3 Shaverfish, the primary scope of Core Fighter was to protect the data collected from the learning computer of the Gundam, working as vehicle of escape in case of damage or destruction of the robot.
Core Fighter was armed with four Vulcan light guns of 25mm mounted in the nose and two small missile launchers on the fuselage with 4 ammunitions each one.
- the wing span is 6,8 mt
- full load weight 8,9 tons
- propulsion supplied by 6 rockets
- the estimated maximum speed of Mach 4,8
The concept of Core Fighter was used in much piece of mobil suits until at least the UC 0153 in the LM312V04 Victory Gundam.
You can use Layer panel in SU to switch between Flying Mode and the Mobil Suit mode. You can switch Cockpit, Rear Wing, Front and back under carriage, Side Wings.